SHARPENING & REPAIR SERVICES
Due to our unique skills and range of sharpening machines, we repair blades that others can't. We sharpen various cutters and small circular saws right up to the largest 6' sawmill and firewood processing blades.
Here are just a few examples of the advanced technologies and specialist sharpening services offered by Bendigo Saw Sharpening:
TUNGSTEN TIPPED TCT SAW BLADES
- Sharpening & Re-Grinding of TCT Saw Blades up to 1830mm Diameter
- Top Grinding Capability
- Alternate Bevel
- Triple Chip
- Trapezoidal
- Hog & Bevel
- PTR
- Re-Tipping of Tungsten Teeth on circular saws for all applications
- Part Re-Tip & Grind
- Complete Re-Tip
- Modification of gullets, tooth count and tooth grind to suit specific applications on request
- Level, hammering & Roll Tensioning of all circular saw blades
- Re-Tipping & Grinding of Arris Cutters
LUCAS MILL & PORTAMILL / PORTABLE SAW MILL BLADES
- Complete Re-Tip, Check Level & Roll Tension
- Straighten Bent Teeth
- Tooth Body Re-Welds as required (where severe damaged has been caused by foreign material)
TUNGSTEN CARBIDE STROBES & WIPERS
- Supply & install TCT Strobes in ripsaw & multisaw blades on request
- Replacement & re-grinding of damaged strobes
HIGH SPEED STEEL BLADES
- Sharpening Repair of Coldsaw Blades, GF Cutters & Slitting Saws:
- Sharpen
- Recut & Sharpen (excessive wear or missing teeth)
- Cut Down, Recut & Sharpen (where blades have large sections missing)
- Sharpening of Segmental Cold Saw Blades up to 1010mm
PRUNING SAW BLADES
- Solid Tooth Circular Pruning & Hedging Saws:
- Sharpen
- Level, Hammer & Roll Tension
- Tungsten Tipped Circular Pruning & Hedging Saws:
- Sharpening
- Level & Roll Tensioning
- Part Re-Tipping
- Complete Re-Tipping
- Modify Gullets & Tooth Count on request for specific applications
SPRING SET SAWS - GIBSON, GREY BENCH ETC. SAWMILLING BLADES
- Hammer & Roll Tension
SPRING SET SAWS - FIREWOOD SAW BENCH BLADES
- Re-Gullet, Set & Sharpen
- Re-Condition / Modify Gullets, Set & Sharpen
- Level, Hammer & Roll Tension
RECONDITIONING OF SAW BENCH BLADES
- Modification & Recondition of Sawbench Blades from S/SET to TCT
- Used Spring Set Solid Tooth saws may be modified to Tungsten Tipped Saws depending on Condition:
- Cut Down & Removal of Existing Teeth
- Cut Out Gullets for new Tungsten Teeth
- Grind & Profile Saw & Tooth Gullets
- Machine Tip Seats, Apply Tungsten Teeth
- Top, Face & Side Grind All Teeth for Uniformity
SAW BLADE MODIFICATIONS
- Custom Modifications Listed can be performed to most sawblades on request:
- Blade Bore Modification - Enlarge Bore Size to suit application
- Manufacture & Fit Reducing Bush to Circular Saw Blade
- Modify Tooth Grind, Bevels & Angles
- Modify Gullet shape for specific Applications
- Adapt or Modify Tooth Rake & Hook to Optimise Performance
- Supply & Install TCT Strobe Wipers
Note this list is not comprehensive; If you don't see your item or application listed, please contact us for a specific appraisal.